This guide will help you get the most from your Maas & Bath DrainFix Pro Kit, explain how to use it, keep your drains flowing smoothly, and answer common questions.
About Your Kit
The Maas & Bath DrainFix Pro Kit is an all-in-one drain care kit that is:
• All-in-one – combines a powerful drain cleaner, sink drains, and rubber fittings in a single kit.
• Fast-acting – helps clear clogs quickly and effectively.
• Odor-fighting – eliminates odor-causing buildup in your drains.
• Easy to use – simple, DIY-friendly steps with no special tools needed.
• Preventive – includes a metal mesh drain catcher to help stop future clogs before they start.
What's in the Box
1 × 200 g (7.1 oz) Maas & Bath DrainFix Ultra (drain cleaner)
2 × Sink Drains
3 × Rubber Fittings
How to Use Your DrainFix Pro Kit
Clearing a Clog
- Add about 3.5 oz (100 g) of DrainFix Ultra directly into the drain.
- Slowly pour in 2–3 cups of hot water (below 140°F / 60°C). Bubbling indicates the cleaner is working.
- Let it sit for 2 hours. Longer wait time improves results.
- Rinse thoroughly with plenty of clean water.
Setting Up for Preventive Care
• Once your clog is cleared, place the metal mesh drain catcher over the drain to help stop debris from causing future clogs.
• Make sure rubber fittings are properly seated for a tight seal.
• This combination helps prevent debris from entering your pipes and keeps your drain flowing smoothly going forward.
Safety Tips
• Only use water below 140°F (60°C) when activating the cleaner — hotter water is not recommended.
• Rinse thoroughly with plenty of clean water after the 2-hour wait time.
• Keep out of reach of children and pets.
• Avoid mixing DrainFix Ultra with other household cleaning chemicals.
Caring for Your Drain Fittings
• Remove and clean the mesh drain catcher regularly to keep it free of debris.
• Check that rubber fittings remain properly seated for a leak-free seal over time.
• Replace rubber fittings if they show signs of wear to maintain a tight seal.
Quick Tips to Keep Your Drains Flowing
• Use the mesh drain catcher year-round to prevent debris buildup before it becomes a clog.
• Give the cleaner the full 2 hours (or longer) to work before rinsing.
• Check rubber fittings periodically and replace if worn.
• Rinse thoroughly with plenty of clean water after every treatment.
FAQs (Frequently Asked Questions)
Q: How long do I need to wait before rinsing?
A: Let the DrainFix Ultra sit for at least 2 hours. Waiting longer can improve results for tougher clogs.
Q: Can I use hot water straight from the tap?
A: Use hot water, but make sure it's below 140°F (60°C). Water that's too hot isn't recommended.
Q: What if my drain is still clogged after one treatment?
A: For stubborn clogs, you can repeat the treatment. If the clog persists after multiple treatments, it may require professional plumbing attention.
Q: Is it normal to see bubbling after I add the product?
A: Yes, bubbling is a normal sign that the cleaner is actively working on the clog.
Q: Can I use this kit on any type of sink drain?
A: The included sink drains and rubber fittings are designed to fit standard drain openings. If you have a non-standard size, check the fit before installing.
Q: How often should I clean the mesh drain catcher?
A: Regularly removing and rinsing the mesh catcher helps keep debris from building up and keeps your drain flowing smoothly. There's no strict schedule — check it whenever you notice slower draining.
Q: Is DrainFix Ultra safe for all pipe materials?
A: Please refer to your product manual or reach out to support if you have specific plumbing material concerns, as this wasn't detailed in the current product summary.
Q: What should I do if the cleaner gets on my skin or in my eyes?
A: Rinse thoroughly with water right away. If irritation persists, seek medical attention. Refer to the product label for full safety and first-aid instructions.
Q: Can I use the sink drains and rubber fittings without using the cleaner?
A: Yes, the sink drains and rubber fittings can be installed as preventive drain care on their own, separate from a clog-clearing treatment.
Q: How do I know if my rubber fittings are seated correctly?
A: They should sit snugly and evenly around the drain opening with no visible gaps. A properly seated fitting should feel secure and not shift when touched.
Need Help?
If you need assistance, please contact:
Email: support@maasbath.com
Phone: (855) 920-9914
When contacting support, include your order number and a short description of the issue.
Still need help? Create a support request with our customer service team and we'd be happy to help.